Planetary Extruder

Project\ Model PRE125 PRE 150 PRE 170 PRE1 90 PRE 220 PRE 255 Main motor power (Kw) 55 75 90 132 200 250 Speed of the main screw (rpm) 60 60 60 60 60 60 Stuffy power (kw) 0.75 0.75 1.5 11 11 11 Features: 1) The "PRE" series of planetary roller extruder, experiences rolling and extrusion in configuration that a planetary screw is inter-engaged at a center of a main SCREW and BARREL which are screwed in a shape of helical gear at 45° 2) The planetary screw revolves and rotates on its axis, in order to employ various resin 3) The extruder is special and applied to various product and mass production 4) In special, because the extruder supplies the rolling and extrusion through space of the inter-engagement, it may plasticize the resin at a low temperature 5) Through the inter-meshing action of the toothed planetary roller system just one single revolution of the main spindle suffices to roll out the plastic melt as many as 1,100 times, ensuring optimum plastification, homogenization and dispersion 6) The "PRE" is a low-temperature forming extruder which may produce without any change of properties owing to its low-temperature forming and homogenizing 7) Combined rolling and extruding action: through the inter-meshing action of the toothed planetary roller system just one single revolution of the main spindle suffices to roll out the plastic melt as many as 1,100 times, ensuring optimum plastification, homogenization and dispersion 8) Compared with other extruder designs, this system increases the contact surface of the melt by up to five times 9) Low-cost formulation: the optimum heat-exchanging effect created by the large contact surfaces of the planetary roller system in conjunction with short residence time of the melt helps to achieve a considerable reduction in formulation costs. Costly stabilizers and lubricants are reduced to a minimum 10) Self-cleaning feature: since all toothed components of the machine constantly inter-mesh, no residual material is left in the machine when changing over from one formulation to another. The system is change-over from one color to another, results in no more than 5kg of scrap